Called to a home in Ilam for TV mounting and wiring. Customer had a new 65-inch Samsung mounted on a plasterboard wall in the lounge. Existing power point was at floor level with cables running visibly up the wall. Looked terrible. We installed a new power point directly behind the TV location inside the wall cavity. Ran HDMI cable and network cable through the wall from TV position down to the entertainment unit. Used a recessed wall plate at both ends for clean finish. Mounted the TV on a full-motion bracket secured to wall studs. All cables completely hidden. No visible wires anywhere. Customer said it looked like a professional showroom setup. Clean modern finish that transforms the room.
Wall mounted TVs look fantastic when done properly. No cables showing. No messy cords dangling down the wall. We handle the electrical work to make your TV installation look professional and clean. Power point relocation, cable concealment, bracket mounting, everything needed for a perfect result.
Why Use an Electrician for TV Mounting
TV mounting involves more than screwing a bracket to the wall. Power point needs to be behind the TV. Running cables inside walls requires knowledge of wall construction and building regulations. In New Zealand only licensed electricians can install or modify power points and fixed wiring. DIY electrical work is illegal and dangerous. We ensure your TV installation is safe, legal, and looks perfect.
Power Point Relocation
Most important part of a clean TV installation. Power point installed directly behind the TV so power cord is completely hidden. We cut a new outlet position in the wall at correct height for your specific TV and bracket. Run cable from existing circuit through wall cavity to new location. Install flush mounted power point. TV plugs in directly behind itself. No visible power cable at all.
Some installations need a double power point behind the TV. One for TV and one for soundbar or streaming device mounted behind TV. We assess your needs and install appropriate outlets. RCD protected circuits for safety as required by regulations.
In-Wall Cable Channels
HDMI cables, network cables, and speaker wires run inside the wall from TV position to entertainment unit below. We install low voltage cable plates at both ends. Recessed plates sit flush with the wall for clean appearance. Cables pass through wall cavity completely hidden. At the entertainment unit end cables emerge neatly behind your equipment. Professional finish with no visible cables on the wall surface.
Wall Types and Mounting
Different wall types require different mounting approaches. Standard timber framed plasterboard walls most common in Christchurch homes. TV bracket must be secured to wall studs not just plasterboard. We locate studs using professional stud finder and secure bracket with appropriate lag bolts. Plasterboard alone cannot support TV weight.
Concrete and Brick Walls
Older Christchurch homes and some newer builds have concrete or brick walls. Require masonry drill bits and concrete anchors. Heavier duty fixings needed. Cable routing more difficult as cables cannot run through solid walls easily. Surface mounted conduit or channel cut into wall may be needed. We have experience with all wall types and find the best solution for each situation.
Plasterboard on Steel Frame
Some modern homes use steel framing instead of timber. Steel studs require special toggle bolts or mounting plates. Different technique to timber frame but equally secure when done properly. We identify frame type before starting and use correct fixings.
TV Bracket Types
Fixed brackets hold TV flat against wall. Slimmest profile. TV sits close to wall. Best for dedicated viewing position where TV angle doesnt need changing. Most affordable option.
Tilting brackets allow TV to tilt downward. Good when TV mounted higher than eye level such as above fireplace. Helps reduce glare from overhead lighting. Moderate profile from wall.
Full-motion brackets allow TV to extend, tilt, and swivel. Pull TV away from wall and angle to different viewing positions. Great for open plan living where you watch from different areas. Best flexibility but sits further from wall when not extended. We supply and install all bracket types.
Above Fireplace Mounting
Popular location for TV mounting in Christchurch homes. Looks great as focal point of living room. Special considerations needed. Heat from fireplace can damage TV over time. We assess heat output and recommend appropriate clearance. Mantle depth affects bracket choice. Cable routing around fireplace surround needs planning. Higher mounting position means tilting bracket recommended for comfortable viewing angle.
Cable Management Solutions
In-wall cable routing is best solution for clean appearance. But sometimes wall construction prevents in-wall installation. Solid concrete walls or full height tiling for example. In these cases we use surface mounted cable channels colour matched to wall. Paintable channels blend with wall colour. Neat straight runs from TV to equipment. Still much better than loose cables hanging on wall.
HDMI and Data Cabling
We install high quality HDMI cables rated for your TV resolution. 4K and 8K compatible cables for modern TVs. Cable length planned to avoid signal degradation. Network cable installed for smart TV internet connection. Ethernet connection more reliable than wifi for streaming. Especially important for 4K content which needs consistent bandwidth. We can also install optical audio cable for soundbar connection.
Soundbar Installation
Soundbar often installed below wall mounted TV. We mount soundbar bracket securely to wall. Power and audio cables concealed same as TV cables. Some soundbars mount directly to TV bracket. Others need separate wall mount. We handle complete audio visual installation including soundbar mounting and wiring.
Multi-Room TV Installation
Some customers want TVs mounted in multiple rooms. Bedroom, lounge, rumpus room, outdoor entertaining area. We do complete multi-room installations. Power points and cable infrastructure in each location. Central equipment location with cables distributed to each TV. Consistent professional finish throughout the home.
Outdoor TV Mounting
Outdoor entertainment areas increasingly popular in Christchurch. TV mounted under covered patio or pergola. Weatherproof power point installation essential. Outdoor rated bracket and mounting hardware. Cable protection from weather. We install outdoor TV setups with proper weatherproofing and electrical protection. RCD protection mandatory for outdoor electrical installations.
Commercial TV Mounting
Restaurants, bars, waiting rooms, offices, retail spaces all use wall mounted TVs. We install commercial displays with proper mounting for public spaces. Digital signage screens. Menu boards. Conference room displays. Multiple screens in sports bars. Commercial grade brackets for larger heavier displays. Neat cable management for professional business environment.
Cost of TV Mounting and Wiring
Basic TV bracket mounting on timber frame wall with existing power point nearby $150-250. Power point relocation behind TV add $200-350 depending on cable run. In-wall HDMI and data cable installation $150-250. Complete package including bracket mounting, power point behind TV, and concealed cables typically $450-750. Larger TVs, difficult wall types, or complex cable runs may cost more. We provide upfront pricing before starting.
Compare to living with messy cables hanging down the wall for years. Professional installation transforms the look of your room. One-time cost for a permanent clean finish. Most customers say they wish they had done it sooner.